About Green Fuel Catalyst
Green Fuel Catalyst which is based on a patent protected Fitch® technology, is manufactured in USA. Catalyst consists of a Heterogeneous Metallic Alloy Composition (HMAC) which transforms and reformulates the molecular composition of a hydrocarbon fuel at ambient temperatures and pressures. Catalyst is not consumed, and requires no additives while having no moving parts, no magnets, no electrical hook-ups, and requires minimum to no maintenance.
This state of the art technology induces more complete combustion chemical reaction, resulting in fuel savings and reduced emissions.
How Green Fuel Catalyst can help you?
Installation on a marine vessel or on a stationary onshore engine for power generation needs is simple. Just locate a suitable place within the booster system after the mixing and heating units on its way to the Main Engine (ME) or the Auxiliary Engine (AE). It is very important to ensure that a multi pass effect is observed so that the fuel recirculated back from the ME or AE to the booster unit passes again through the fuel catalyst before being discharged back into the engine.
When installing in gas applications for power generation or heating, locate a suitable installation place for the catalyst and install with a bypass according to local requirements.
No additives, no moving parts, no electrical hookups – during the catalytic chemical reaction, the Catalyst alloy is not consumed. It does not need any additives, has no moving parts, no electrical hookups and does not require any extra maintenance.
How Scanvi-Interyards work with Green Fuel Catalyst
Scanvi-Interyards is the official representative of the Green Fuel Catalyst (GFC) in Norway.